Installing the App

1. Navigate to the app store, download and install SBG Focus.
   
2. Once installed, launch the app and login. 

Connecting the iPad via Wifi

1. Open the iPad settings.
   
2. Navigate to Wifi and connect to the Ruckus network. 
3. Once connected, click the 'i' next to your Wifi.
   
   
4. Scroll down to IPv4 Address, and Change Automatic to Manual, then enter an available IP, the Subnet Mask and the Router IP from the network and press save.
   
   Note that sometimes this may take 2 times for the settings to save there.
   
   To find this information:
   • On a Mac: Go to System Preferences > Network.
     
   • On Windows: Open Command Prompt, type in ipconfig. Find the network connection.
     
     
     
5. Once the iPad is on the same network as the Focus Server, navigate to the server tab in the Focus app settings.
6. Choose the server, enter the password, and choose connect. 

Connecting the iPad via Ethernet

1. Plug the ethernet into the network switch.
2. Use an ethernet to lightning adapter to connect it to the iPad.
   
3. Once the iPad is on the same network as the Focus Server, navigate to the server tab in the Focus app settings.
4. Choose the server, enter the password, and choose connect.